Terraillon X-LINE FIT Manual De Instrucciones página 16

To weigh and measure
1� After setting up of the data, when LCD displays 0�0 kg, you may weigh or
stand on the scale platform directly, the weight value will be shown after a few
seconds and the user is recognized�
2� After the weight is stable, the flashing " " means that the scale is measuring
the body composition, the " " signal moves from left to right for one times,
and then shows the data�
3� Display the measurement
The LCD screen then displays BMI and body masses (fat percentage, water percentage, muscle mass and
bone mass) for three times�
Repeat procedure for a second user, or to change user details�
Automatically identify the user measurement.
1� When the user stand on the scale directly, the scale will turn on and lock the weight�
2� When the weight is stable, display moving " " means it is measuring� If it can identify the user successfully,
it will display the measurement� If it detect several similar weights, the profile number flashes� Use the
UP and DOWN buttons to select the user number, then press SET� Once you have selected the user,
the measurements will be displayed and then the unit will turn off� If you do not select a user within 10
seconds, the weight will be displayed for a few seconds and then the unit will shut off (the weight will not
be assigned to a user)�
3� If it occurred error or it can't identify the user, it will display the present weight and turn off�
WARNING INDICATORS
Overload :
remove weight immediately
16
EN
BODY FAT SCALE
Battery low,
charge scales
Failure of pairing up
your scale with your smartphone�