Stiga BC 500 Li 48 Manual De Instrucciones página 183

PROBLEM
13. The battery charger
is not recharging
the battery
14. The LED indicator
(Fig. 12.G, Fig.
13.G) remains ON
in steady mode
15. The LED indicator (Fig.
12.G. Fig. 13.G) remains
ON in flashing mode
If problems persist after having performed the operations described above, contact your dealer.
15. ACCESSORIES ON REQUEST
15.1 BATTERIES
Different capacity batteries are available
suit specific operating requirements (Fig. 32).
The list of approved batteries for this machine
can be found in the "Technical Data" table.
15.2 BATTERY CHARGER
Device used to recharge the
(Fig. 33.A), standard (Fig. 33.B).
15.3 BATTERY BACKPACK
The device is used to place the two batteries
and provides the electrical power required
for the operation of the machine.
It is provided with a cable used for the
connection to the machine (Fig. 1.O) and with
a selector (Fig. 11.B) to select one of the two
batteries (position "1" and "2") and "OFF".
PROBABLE CAUSE
Battery is not correctly inserted
in the battery charger
Unsuitable environmental conditions
Dirty contacts
The battery charger is not energised
Faulty battery charger
-
Self-check failed
Battery communication error
Rotor blocked
Current overload
PCB overheated
to
battery: fast
Check it is correctly inserted (para. 7.2.2)
Recharge the battery in places with
suitable temperatures (see battery/
battery charger instruction manual)
Clean the contacts
Check it is plugged in and the
power socket is energised
Replace with an original spare part
If the problem persists, refer to the
battery/battery charger manual
Do not use the machine. Immediately turn
off the machine,
contact an authorised service centre.
Do not use the machine. Immediately turn
off the machine,
contact an authorised service centre.
Do not use the machine. Immediately turn
off the machine,
contact an authorised service centre.
Optimize machine usage.
Do not use the machine. Immediately turn
off the machine,
contact an authorised service centre.
15.4 BATTERY SIMULATOR
Device that, if inserted in the machine housing,
allows the use of the battery backpack.
EN - 19
SOLUTION
remove the battery and
remove the battery and
remove the battery and
remove the battery and