Tabla de contenido
Publicidad
Corded
Buttonholes
Machine
setting
(_ Stitch pattern:
l
(_ Presser foot:
R: Automatic BH foot
(_) Thread tension dial:
1-5
Q
Stitch width:
3-5
0
Stitch length:
05-1
[]
With the buttonhole foot raised, hook the filler
cord on the cord spur at the back of the
buttonhole foot,
Bring the ends toward you under the buttonhole
foot until they clear the front end.
Hook the filler cord into the forks on the front of
the buttonhole foot to hold them tight_
[]
Lower the needle into the garment where the
buttonhole will start and lower the foot.. Depress
the foot control gently and sew the buttonhole
Each side of the buttonhole and the bartacks
will be sewn over the cord.
,*, The sewing steps are the same as the automatic
buttonhole sewing
%
Remove the fabric from the machine and cut the
sewing threads.
Pull the left end of the filler cord to tighten it,
Thread the end through a darning needle, draw
to the bottom side of the fabric and cut.
®
®
®
fl
g
H
f
[]
%
[]
J
4O
Publicidad
Tabla de contenido
