Tabla de contenido
Publicidad
Presser Foot Lifter
The presser foot lifter raises and lowers the presser fool
You can raise it about 0,6 cm (t/4") higher than the
normal up position for easy removal of the presser foot,
or to help you to place heavy fabric under the foot.
(_ Lowered position
O Normal up position
(_ Highest position
Pressure Adjusting Dial
The pressure
adjusting
dial should be set at "3"
for regular sewing.
Reduce the pressure
to "2" for the applique,
cutwork,
drawn work and basting
Set the pressure
at "I" when sewing the chiffon,
lace, organdy
and other fine fabrics..
Velour and knits with a lot of stretch may also
require the pressure
at "1"
(_
Setting mark
Balancing Needle Thread Tension
Correct tension
The thread tension
is adjusted
depending
on the sewing
materials,
layers of fabric and sewing
method..
,_ The ideal straight
stitch has threads
locked
between
two layers of fabric, as illustrated
(magnifies
to show detail).
,=, For an ideal zigzag stitch, the bobbin thread
does not show on the right side (top side) of the
fabric, and the needle thread shows slightly
on
the wrong side (bottom
side) of the fabric
[]
Needle thread tension is too tight
The bobbin thread (bottom
thread) will appear
on the right side (topside)
of the fabric ........
Loosen the needle thread tension
by moving the
dial to a lower number.
[]
Needle thread tension
is too loose
The needle thread (top thread) will appear on
the wrong
side (bottom side) of the fabric
......
Tighten the needle thread tension
by moving the
dia! to a higher number,
(_ Needle thread (Top thread)
O Bobbin
thread (Bottom
thread)
(_ Right side (Top side) of fabric
40 Wrong side (Bottom
side) of fabric
(_ Setting mark
_) Thread tension
dial
f
f
[]
[]
[]
I2
©
xj
®
r
Publicidad
Tabla de contenido
