baltur TBG 45 PN-V Manual De Instrucciones página 16

Quemadores de gas diestado con inversor
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
TABLE 1
Table indicating the set frequencies
Number of red lights on
1
2
3
4
5
6
7
8
TABLE 2
Inverter fault code table
FAULT CODE
N.4 green leds on,
The internal temperature of the microcontroller
red led N.1 on
has reached unacceptable values
N.4 green leds on,
The temperature measured by the dissipator
red led N.2 on
on the NTC sensor has reached unacceptable
values. The fault status does not remain when the
motorinverter is reset and restarts automatically
N.4 green leds on,
The burner power supply voltage has reached
red led N.3 on
unacceptable values.
N.4 green leds on,
The internal power supply of the motorinverter
red led N.4 on
has fallen below unacceptable values
N.4 green leds on,
The electric current in the motor has exceeded
red led N.5 on
the safety threshold.
N.4 green leds on,
The electric current in the motor has exceeded
red led N.6 on
the safety threshold. Hardware protection much
faster than the previous act of safeguarding the
motorinverter itself.
N.4 green leds on,
Internal EEPROM memory fault
red led N.7 on
Output frequency scale [Hz]
18 - 22
22 - 26
26 - 30
30 - 34
34 - 38
38 - 42
42 - 46
46 - 50
DESCRIPTION
0006081484_201104
POSSIBLE CAUSES
The burner is installed in an environment with temperature
conditions that are outside the envisaged limits for proper
operation (At<-10°C or At>40°C).
- Unacceptable ambient temperature
- Insufficient thermal exchange by the dissipator (Check that
the space between the dissipator fins is not obstructed
by dust or dirt)
Power surges in the electrical supply line. Check that the
line is within the values (V=230 -10% +15%)
Inverter board fault. Contact assistance centre
The electric motor has absorbed an higher amount of
current than the amount on its information plate, due to an
overload for example.
The electric motor has absorbed an higher amount of cur-
rent than the amount on its information plate, due to the
seizure of a bearing for example.
Inverter board fault. Contact assistance centre
14 / 24

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Tbg 60 pn-v

Tabla de contenido