Construction Characteristics - baltur TBG 45 PN-V Manual De Instrucciones

CONSTRUCTION CHARACTERISTICS

The burner consists of the following parts:
• Combustion air intake with butterfly gate for adjusting the air
flow rate, designed to obtain optimal linear air shutter opening.
• Mounting flange to the sliding generator, to adapt the protuber-
ance of the head to various types of heating generators.
• Fan activation through electric motor controlled electronically
by the frequency converter.
• Air pressure switch to ensure the presence of combustion air.
• Minimum and maximum air flow adjustment for by means of
electric servomotor.
• Gas train complete with security valve and proportional func-
OVERALL DIMENSIONS
1) Combustion head
2) Insulation Gasket
3) Burner connection flange
4) Combustion head adjustment device
5) Cover
6) Gas train connector flange
7) Electrical panel
8) Motor
9) Air regulation servomotor
10) Air pressure switch
11) Inverter
MODEL S A1 A2
550 270 280 435 325 160 920 140 300 137 133 215 200 245 M12 145 182 12 42,5 73,6
TBG 45 PN-V
550 270 280 455 325 160 920 140 300 156 152 260 225 300 M12 160 194 12
TBG 60 PN-V
B B1 B6 C D D
min max Ø
5 / 24
0006081484_201104
tioning, pneumatic functioning, minimum pressure switch,
pressure regulator and gas filter.
• Flame detection by ionisation electrode.
• Automatic command equipment and burner control according
to European regulation EN298.
• Connection to gas train with fail safe connectors.
• 7 pole plugs for the electricity supply and the thermostat
connection of the burner, 4 pole plug for the command of the
second stage of functioning or the electric power regulator.
• Suitable for microammeter connection to the ionisation cable.
• Electrical system with protection rating IP44.
E F I L L
Ø min max
M H N1 Z Z1 Z2
79 45,5