Hofmann geodyna 8200 Manual De Operador página 36

P15
P16
P17
P19
P21
P23
P25
P26
36
P18
P20
P22
P24
Layout
Symbols relating to OPTIMISATION /
MINIMISATION operations
P15 Start the measuring run.
P16 Apply the Calibration weight.
P17 Make a mark on left tyre side.
P18 Make a mark on right tyre side.
P19 Fit tyre on rim and inflate to the specified inflation
pressure.
P20 Turn the tyre over on the rim
P21 Rotate rim until valve is exactly perpendicular to
and above the chuck.
P22 Rotate wheel until valve is exactly perpendicular
to and above the chuck.
P23 Push tyre on rim until the mark coincides precisely
with the valve.
P24 Push tyre on rim until the double mark coincides
precisely with the valve.
P25 Compensation position for both correction planes
reached.
P26 Use a Tyre Changer in order to continue.