Hofmann geodyna 8200 Manual De Operador página 56

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
56
Operation
Sequence with locked wheel on
5.2.3.3
shaft.
STEP 1
1a - Press the pedal to activate the lifter.
STEP 2
1a - Bring the carriage under the wheel.
1b - The lifter platform is under the wheel.
2a - Pull the handle upwards to lift the lifter up.
2b - The lifter platform is lifted and near the wheel.
3b - Lift the pedal to unlock the wheel.
STEP 3
1a - Shift the platform with the wheel on it.
1b - The wheel is outside the shaft working area.
2a - Press the pedal to move the wheel to the floor.
STEP 4
1a - Place the wheel onto the lifter platform.
1b - The wheel is on the lifter platform.
2a - The wheel is outside the shaft working area.
2b - Press the pedal to lift the wheel up.
STEP 5
1a - The wheel is in lifted position.
1b - Align the rim hole with the wheel holder shaft
pulling the handle upwards to let the lifter rise.
2a - Insert the wheel on the shaft.
2b - Insert the sleeve on the shaft.
2c - Keep the sleeve pressed.
3a - Lift the pedal to lock the wheel; the lifter will
lower automatically.
WARNING: UPON PRESSING THE ESC KEY THE
LIFT/HELP SCREEN WILL NO LONGER APPEAR
UNTIL THE FOLLOWING MACHINE RESTART.