Adjustment; Steering Friction; Throttle Grip Friction; Trim Tab Adjustment - TOHATSU M 6B Manual Del Propietário

44

ADJUSTMENT

ENOM00073-B

1. Steering friction

ENOW00074-A
Do not overtighten the steering friction
lever it could result in difficulty of move-
ment resulting in the loss of control caus-
ing an accident and could lead to severe
injury.
Adjust this lever to achieve the desired
steering friction (drag) on the tiller handle.
Move lever towards (2) to tighten friction
and move lever towards (3) to loosen fric-
tion.
9
1. Steering friction bolt
2. Lighter
3. Heavier
ENOM00074-A

2. Throttle grip friction

ENOW00074-B
Do not overtighten the throttle adjustment
screw or it could result in difficulty of
movement resulting in the loss of control
causing an accident and could lead to
severe injury.
Friction adjustment of the throttle grip can
WARNING
1
3
2
ENOF02234-0
WARNING
be made with the throttle adjustment
screw.
2
3
1. Throttle friction adjustment screw
2. Heavier
3. Lighter
ENOM00076-0

3. Trim tab adjustment

ENOW00076-0
WARNING
Be sure that outboard motor is secured
to transom or service stand, or acciden-
tal drop or fall of outboard motor could
lead to severe personal injury.
Be sure to lock outboard motor if it is
tilted up, or accidental fall of outboard
motor could lead to severe personal
injury.
Do not go under outboard motor tilted
up and locked, or accidental fall of out-
board motor could lead to severe per-
sonal injury.
ENOW00075-0
WARNING
Inappropriate adjustment of trim tab could
cause steering difficulty. After installing or
1
ENOF02235-0