TOHATSU M 6B Manual Del Propietário página 58

56
INSPECTION AND MAINTENANCE
1
2
1. Electrode
2. Spark gap (0.9–1.0 mm, 0.035–0.039 in)
7. Install the spark plug by hand and turn
it carefully to avoid cross-threading.
8. Tighten the spark plug to the specified
torque.
ENON00028-0
Note
Spark plug torque:
25.0 Nm (18 ft-lb) [2.5 kgf-m]
If a torque-wrench is not available when you
are fitting a spark plug, a good estimate of
the correct torque is 1/4 to 1/2 a turn past
finger-tight. Have the spark plug adjusted to
the correct torque as soon as possible with
a torque-wrench.
10
ENOF00085-0
ENOF02237-0