Honda NT700V Manual Del Propietário página 188

To adjust the adjuster to the standard
position, proceed as follows:
1. Turn the spring preload adjuster knob
(1) counterclockwise until it will no
longer turn (lightly seats). This is the full
LOW position.
2. The adjuster is set in the standard
position when the spring preload
adjuster knob is turned clockwise 8
clicks.
(1) Spring preload adjuster knob
28
The rear shock absorber assembly includes
a damper unit that contains high pressure
nitrogen gas. Do
disassemble or service the damper; it
cannot be rebuilt and must be replaced
when worn out. Disposal should only be
done by your Honda
instructions found in this owner's manual
are limited to adjustment of the shock
assembly only.
not attempt to
dealer. The
E