Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Removal:
1. Make sure the ignition switch is OFF.
2. Remove the seat (page 57).
3. Release the rings and remove the
rubber band (1).
4. Disconnect the negative (-) terminal
lead (2) from the battery first, then
disconnect the positive (+) terminal lead
(3).
5. Pull out the battery (4) from the battery
box.
E
Installation:
1. Reinstall in the reverse order of removal.
Be sure to connect the positive (+)
terminal first, then the negative (-)
terminal.
2. Check all bolts and other fasteners are
secure.
(1) Rubber band
(2) Negative (-) terminal lead
(3) Positive (+) terminal lead
(4) Battery
117
Publicidad
Tabla de contenido
