Rear Fender - Honda NT700V Manual Del Propietário

REAR FENDER

The rear fender can be removed for rear
wheel removal.
Removal:
1. Open both the right and left saddlebags
(page 68).
2. Remove the bolts A (1) and pull out the
rear fender (2).
3. Turn the socket (3) counterclockwise,
then pull it out.
64
Installation:
1. Remove the bolts B (4) and screw (5).
2. Insert the socket to the rear fender and
turn it clockwise.
3. Install the right edge of rear fender first,
then insert the prongs (6) into the
grommets (7).
4. Install the left edge of rear fender.
5. Tighten the bolts A, bolts B and screw.
6. Close both the right and left saddlebags
(page 68).
E