Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3. Loosen the lock nut (4) at the lower end
of the cable. Turn the adjusting nut (5)
to obtain the specified freeplay. Tighten the
lock nut and check the adjustment.
4. Start the engine, pull in the clutch lever
and shift into gear. Make sure the
engine
does
not
motorcycle does not creep. Gradually
release the clutch lever and open the
throttle. The motorcycle should begin to
move smoothly and accelerate gradually.
(4) Lock nut
(5) Adjusting nut
E
stall
and
the
(A) Increase freeplay
(B) Decrease freeplay
If proper adjustment cannot be obtained
or the clutch does not work correctly, see
your Honda dealer.
Other Checks:
Check the clutch cable for kinks or signs
of wear that could cause sticking or failure.
Lubricate the clutch cable with a commercially
available cable lubricant to prevent premature
wear and corrosion.
33
Publicidad
Tabla de contenido
