Rear Wheel Removal - Honda NT700V Manual Del Propietário

Rear Wheel Removal

1. Place the motorcycle on its center stand.
2. Remove the right side cover (page 62).
3. Release the wire harness (1) from the
wire harness holder (2).
4. Push the tab (3) and release the
connector (4) from the stay (5).
5. Pull the connector out.
6. Remove the bolts A (6) and exhaust
cover (7).
7. Loosen the bolts B (8).
8. Remove the bolt C (9) and bolt D (10).
9. Pull the muffer (11) out and remove it.
(1) Wire harness
(2) Wire harness holder
(3) Tab
E
(4) Connector
(5) Stay
(6) Bolts A
(7) Exhaust cover
(8) Bolts B
(9) Bolt C
(10) Bolt D
(11) Muffler
111