Honda NT700V Manual Del Propietário página 189

BRAKES
Both the front and rear brakes are the
hydraulic disc types.
As the brake pads wear, the brake fluid
level drops.
There are no adjustments to perform, but
fluid level and pad wear must be inspected
periodically. The
inspected frequently to ensure there are
no fluid leaks. If the control lever or pedal
free travel becomes excessive and the
brake pads are not worn beyond the
recommended limit (page 114), there is
probably air in the brake system and it
must be bled. See your Honda dealer for
this service.
Front Brake Fluid Level:
With the motorcycle in an upright position,
check the fluid level. It should be above
the LOWER level mark (1). If the level is at
or below the LOWER level mark, check the
brake pads for wear (page 114).
E
system must be
Worn pads should be replaced. If the pads
are not worn, have your brake system
inspected for leaks.
The recommended brake fluid is Honda
DOT 4 brake fluid from a sealed container,
or an equivalent.
Front
(1) LOWER level mark
29