Side Stand - Honda NT700V Manual Del Propietário

SIDE STAND

Refer to the safety precautions on page
86.
Perform the following maintenance in
accordance with the maintenance schedule.
Functional Check:
• Check the side stand spring (1) for
damage or loss of tension and the side
stand assembly for freedom of movement.
• Check the side stand ignition cut-off
system:
1. Sit astride the motorcycle; put the
side stand up and the transmission
in neutral.
2. Start the engine and with the clutch
lever pulled in, shift the transmission
into gear.
3. Lower the side stand. The engine
should stop as you put the side
stand down.
106
If the side stand system does not operate
as described, see your Honda dealer for
service.
(1) Side stand spring
E