Instructions For Use (Qualified Personnel) - Ottobock AxonMaster 13E500 Instrucciones De Uso

CAUTION
Incorrect assembly
Injury due to faulty control or malfunction of the product.
► During assembly, pay special attention to the section "Preparation for Use" in these
Instructions for Use.
CAUTION
Use of unsuitable prosthesis components
Injury due to faulty control or malfunction of the product.
► Only combine the product with prosthesis components approved by Ottobock (see the
Instructions for Use and catalogues).
CAUTION
Penetration of liquids
Injury due to faulty control or malfunction of the product.
► Make sure that no liquids can get into the product.
► Do not use the product for bathing prostheses.
CAUTION
Incorrect laying of the connecting cables
Injury due to faulty control or malfunction of the product as a result of damage to the connecting
cables due to incorrect laying.
► When installing the cables, make sure there are no tight angles or kinks.
NOTICE
Distance to HF communication devices is too small (e.g. mobile phones, Bluetooth
devices, WiFi devices)
Product malfunction due to interference during data transfer.
Therefore, keeping the following minimum distances to these HF communication devices
►
is recommended:
• Mobile phone GSM 850/GSM 900: 0.50 m
• Mobile phone GSM 1800/GSM 1900/UMTS: 0.35 m
• DECT cordless phones incl. base station: 0.18 m
• WiFi (routers, access points,...): 0.11 m
• Bluetooth devices (third-party products not approved by Ottobock): 0.11 m
NOTICE
Improper care
Damage to the casing through the use of acetone, petrol or similar solvents.
► Only use a damp cloth and mild soap to clean the product.
INFORMATION
Prior to initial operation of the product, charge the supplied battery.
INFORMATION
The product serves to adapt the prosthesis to individual user requirements. Please be aware
that only a carefully adjusted prosthesis will improve the user's quality of life. If you do not
14 | Ottobock