Bksr-101/101P One-Channel Decoder Board; Bksr-102 Two-Channel Decoder Board - Sony VideoStore VSR-1000 Instrucciones De Funcionamiento

BKSR-101/101P One-Channel
Decoder Board
The format of video output can be switched between
composite and component. Up to six of these boards
can be installed in one VSR-1000 Media Control Unit.
Performance
Bit rate 5.0 Mbps/10.0 Mbps
a) Fixed at 5.0 Mbps when these boards are used in
conjunction with BKSR-102s.
Output connectors
Video
COMPOSITE 1, 2 (when composite format is selected)
BNC-type, × 2
1.0 Vp-p ±0.2 V, 75-ohm, sync
negative
S/N: 46 dB or more
COMPONENT Y/R–Y/B–Y (when component format
is selected)
BNC-type, × 3
Y: 1.0 Vp-p ±0.2 V, 75-ohm, sync
negative
R–Y: 0.7 Vp-p ±0.1 V, 75-ohm
B–Y: 0.7 Vp-p ±0.1 V, 75-ohm
S/N: 46 dB or more
REF IN 1.0 Vp-p ±6 dB, 75-ohm, sync
negative
Audio
AUDIO OUT CH1 to CH4
XLR 3-pin, × 4, male
+4 dBu, 600-ohm, balanced
S/N (dynamic range): 80 dB or
more
Accessories supplied
Operating Instructions (1)
BKSR-102 Two-Channel Decoder
Board
The format of video output can be switched between
composite and component, and between NTSC and
PAL. Up to six of these boards can be installed in one
VSR-1000 Media Control Unit.
Performance
a)
Bit rate
Input connector
CHANNEL A/B VIDEO SYNC IN (when composite
Output connectors
Video
CHANNEL A/B COMPOSITE 1/2 (when composite
CHANNEL A/B COMPONENT Y/R–Y/B–Y (when
Audio
CHANNEL A/B AUDIO OUT CH1/CH2
5.0 Mbps
video format is selected)
BNC-type, × 2
1.0 Vp-p ±6 dB, 75-ohm, sync
negative
format is selected)
BNC-type, × 4
1.0 Vp-p ±0.2 V, 75-ohm, sync
negative
S/N: 46 dB or more
component format is selected)
BNC-type, × 6
Y: 1.0 Vp-p ±0.2 V, 75-ohm, sync
negative
R–Y: 0.7 Vp-p ±0.1 V, 75-ohm
B–Y: 0.7 Vp-p ±0.1 V, 75-ohm
S/N: 46 dB or more
XLR 3-pin, × 4, male
+4 dBu, 600-ohm, balanced
S/N (dynamic range): 80 dB or
more
21