Sony VideoStore VSR-1000 Instrucciones De Funcionamiento página 7

System configuration for loading via data streamers
Using data streamers allows you to perform encoding
at a location and loading at a different location from
the encoding location. The setup allows loading in a
Host computer
RS-232C or
RS-422A
VST-1000/1000P
MPEG-2 Encoding Unit
Audio and video signals
RS-422A
VCR
VSH-1000 Media Unit
(used as a library unit)
Data Streamer
(SDX-VS300 AIT Drive Unit)
a) A BKSR-103 Clip Exchange Board (option) must be installed in
the VSR-1000 unit in order to connect a data streamer.
b) Installing BKSR-101/101P/102 One-Channel/Two-Channel
Decoder Boards (option) in the VSR-1000 unit allows you to
play back or transmit video clips without interrupting loading
operation. The number of channels you can use for playback/
transmission depends on the type and number of decoder
boards installed.
shorter time than realtime loading, and invaluable data
and programs can be left on tape.
Host computer
RS-232C or
RS-422A
Streamer
tape
c) You can connect up to seven VSH-1000 Media Units to one
VSR-1000 unit.
SCSI-2
SCSI-2
(Status information)
1 2 ... 6
SCSI-2
(Status information)
1 2 ... 6
Data Streamer a)
(SDX-VS300 AIT
Drive Unit)
Program outputs b)
(analog signals)
VSR-1000 Media
Control Unit
VSH-1000
Media Unit
c)
VSH-1000
Media Unit
VSH-1000
Media Unit
7