Activating The Backlight; Activating The Keypad Lock; Switching Between Operation Modes - Oregon Scientific VIBRA Trainer Fit Manual De Usuario

2. Press SET until you reach the feature you wish to change.
3. Press ST / SP / + or MEM / - to change the setting.
4. Press SET to confirm the setting and move on to the next one.

ACTIVATING THE BACKLIGHT

When the Light Mode is set to OFF:
• Press to turn on the backlight for 3 seconds. Press any
other key whilst the light is on and it will extend the light time
by another 3 seconds.
When the Light Mode is set to ON:
• Press any key to turn ON or extend the backlight for 3 seconds.
To help conserve power the Light Mode ON setting will
automatically switch to OFF after 2 hours.
NOTE The backlight does not work when the low battery icon is
shown and will return to normal once the batteries are replaced.

ACTIVATING THE KEYPAD LOCK

To turn the keypad lock ON or OFF:
• Press and hold
display when the keypad lock is on.

SWITCHING BETWEEN OPERATION MODES

Press MODE to switch between the 5 operation modes:
• Real-Time Clock
• Alarm Clock
• User Profile / Exercise Profile
• Timer - SMART TRAINING PROGRAM
• Stopwatch
The modes are described in the sections that follow.
You can run the SMART TRAINING PROGRAM or stopwatch
NOTE
in the background as you access other modes. The icon for the mode
that is running will flash until you switch back to that mode.
for 2 seconds.
15
will appear on the