SETTING THE CLOCK
There are two setting modes: 12 hour clock and 24 hour clock.
To set the clock, follow the example below.
Example: To set the 12 hour clock to 11:35.
1. To set the 12 hour clock, hold
the MICROWAVE POWER
LEVEL button down for 3
seconds.
will appear in
the display.
4. Set the minutes.
Rotate the TIMER/WEIGHT
knob until the correct minute is
displayed (35).
Example: To set the 24 hour clock to 23:35.
1. To set the 24 hour clock, hold
the MICROWAVE POWER
LEVEL button down for 3
seconds.
will appear in
the display.
4. Press the MICROWAVE
POWER LEVEL button
to change from hours to
minutes.
x1
Check the display.
NOTE:
1. You can rotate the TIMER/WEIGHT knob
clockwise or counter-clockwise.
2. Press the STOP button if you make a mistake
during programming.
3. If the electrical power supply to your microwave
oven is interrupted, the display will intermittently
2. Set the hours.
Rotate the TIMER/WEIGHT
knob until the correct hour is
displayed (11).
5. Press the MICROWAVE POWER
LEVEL button to start the clock.
2. Press the MICROWAVE
POWER LEVEL button
to change from 12
hours to 24 hours.
Check the display.
5. Set the minutes.
Rotate the TIMER/WEIGHT
knob until the correct minute is
displayed (35).
3. Press the MICROWAVE
x1
3. Set the hours.
Rotate the TIMER/WEIGHT
knob until the correct hour is
displayed (23).
x1
6. Press the MICROWAVE
POWER LEVEL button to
start the clock.
show
after the power is reinstated. If this
occurs during cooking, the programme will be
erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the
above example again.
8
POWER LEVEL button
to change from hours to
minutes.
x1
Check the display.
Check the display.
Check the display.
x1