Contents Of The Package - Astralpool 37059 Manual De Instalación

This guide allows you to:
Understand the operating principle of your immersion detection system;
I
I Position and fasten your immersion detection system according to the characteristics of your
swimming pool;
I Perform regular operation tests on your immersion detection system.
FILL OUT, SIGN and SEND the TEST VALIDATION SHEET by mail to AstralPool within
7 days after your purchase, at the following address:
In case of negligence or non-receipt of the test validation sheet, the warranty related to
your Sun™/Confort™ alarm system cannot be applied (if it is missing from the packaging,
immediately inform your reseller).

1. Contents of the package

Despite the careful attention we pay to the quality of our products and their packaging, you are
requested to check the contents of the package, depending on the type of your immersion detector.
COMPONENTS
1 central unit with its black flexible tube, and for Confort
the T° probe and the pH probe (Warning! the black flexible tube
and the Confort probes are connected to the central unit,
TM
take care not to pull on them)
1 rigid tube
1 7V lithium battery
1 fastening kit (screws, washers, joints, rawplugs, 2 magnet key-rings)
1 test validation sheet for the warranty (included in these instructions)
1 conformity declaration sheet
The terms of warranty at the end of this guide
1 Remota™ remote siren
1 pH calibration kit (Confort TM
To get additional magnets, contact your retailer.
AstralPool SAU
Avda Francesc Macia, 38 Planta 18
08208 Sabadell – Spain
TM ,
)
2
SUN™ CONFORT™
• •
• •
• •
• •
• •
• •
• •
• •
-
•