Operating Principle - Astralpool 37059 Manual De Instalación

2. Operating principle

How does Sun™ / Confort™ work?
Thanks to its on-board technology, your immersion detector continuously monitors the condition
of the pool. In case of a fall into your swimming pool, your immersion detector sets off its siren in
accordance with the requirements of French standard NF P90-307/A1.
You must deactivate the surveillance of your immersion detector before having a swim. (see item 4.1)
After your swim, your immersion detector automatically resumes monitoring of the pool as soon
as it has become still again. (see item 4.2)
The new Sun™/Confort™ technology includes a pool continuous analysis system.
Sun™/Confort™ Signal principles:
STATUS
Your immersion detector
is monitoring
Your immersion detector
is not monitoring
Your immersion detector is off
Your immersion detector
is leaving the TEST mode
Low battery
ACTION
When moving the magnet
over the swimmer symbol:
1 long high-pitched beep
When moving the magnet
over the swimmer symbol:
10 short high-pitched beeps
When moving the 2 magnets
(swimmer symbol and red stop sign):
10 short high-pitched beeps (see item 4.6)
Specific tune
(see item 4.5)
4 short low-pitched beeps every time
the magnet is moved
1 short, low-pitched beep every minute
3
SIGNAL
VISUAL
(at the rear of the device)
indicator light off
...
...
flash at two-second intervals
...............
flash once a minute
_
_