Astralpool 37059 Manual De Instalación página 8

EXAMPLES:
Examples of positioning of your central unit.
I
Check that there is easy and practical access to the activation zone (where you place the magnet).
The probe must be immersed by 15 cm (± 3cm) to ensure optimum operation.
If the water level has been deliberately lowered, suitable probe extenders are available
from your retailer.
The water level must be checked regularly, and must be restored if required to
maintain an immersion depth of 15 cm (+/- 3cm). The installation of a level controller
is recommended. Contact your retailer for advice.
If the probe is immersed to deeply, or not deeply enough, (or even not at all), your immersion
detector will not work properly. Please make sure that the recommended immersion depth
is respected.
7m maximum
Either location
7
Either location
15cm
±
( 3cm)