MSA Orion plus Manual De Operación página 43

• The FIGURE 5-8 screen shows the:
• sensors
• alarm thresholds for these sensors.
• By selecting the options you can activate or deactivate the alarm.
• This can only be done for both alarm thresholds together.
• The alarm thresholds:
• can be changed to suit the user's requirements and
• transmitted to the instrument by closing the window.
• By clicking on the relevant button the user can:
• cancel the changes made or
• set the values to a standard setting.
• By using the buttons in the navigation bar (FIGURE 5-7) the user
can access other program areas, such as:
• Data storage – display and store the instrument data
• Event storage – display and store the event data
• Instrument settings – instrument settings and configuration
• MCIR settings – MCIR settings and configuration.
NOTE: The program areas, instrument settings and MCIR settings are
only accessible with valid authorization.
For access to the area MCIR settings, the corresponding sensor
must be installed.
Figure 5-8. Alarm Settings
5-15