Cleaning And Periodic Checks; Cleaning And Routine Care; Warning - MSA Orion plus Manual De Operación

3. Exclusion of Consequential Damages- Purchaser specifically
understands and agrees that under no circumstances will seller be
liable to purchaser for economic, special, incidental or
consequential damages or losses of any kind whatsoever, including
but not limited to, loss of anticipated profits and any other loss
caused by reason of nonoperation of the goods. This exclusion is
applicable to claims for breach of warranty, tortious conduct or any
other cause of action against seller.

Cleaning and Periodic Checks

As with all electronic equipment, the Orion plus Multigas Detector will
operate only if it is properly maintained.
Repair or alteration of the Orion plus Multigas Detector,
beyond the procedures described in this manual or by any-
one other than a person authorized by MSA, could cause the
instrument to fail to perform properly. Use only genuine MSA
replacement parts when performing any maintenance proce-
dures described in this manual. Substitution of components
can seriously impair instrument performance, alter intrinsic
safety characteristics or void agency approvals.
FAILURE TO FOLLOW THIS WARNING CAN RESULT
IN SERIOUS PERSONAL INJURY OR DEATH.

Cleaning and Routine Care

Periodically clean the Orion plus Multigas Detector case with a soft
damp cloth.
1. Remove the sensor cover plate, sensor membrane, and sensor
cover gasket (see Chapter 8, FIGURE 8-1)
2. Clean sensor plate holes with a paper clip, wire, or similar device.
The holes may also be cleaned with oil-free compressed air.
3. Replace sensor membrane with a new one.
Do not attempt to clean the sensor cover plate while
place; sensor damage may occur. The tops of sensors are
very fragile; do not touch or apply pressure to the tops of
any sensors. If a sensor is damaged, it can cause the unit
to give false readings.The sensor cover plate contains
6-2

" WARNING

" WARNING
it is in