Visual Check For Damage / Level Of The Compressed Air Cylinder; Regular Checking - MSA S-Cap-Air Manual De Funcionamiento

MAINTENANCE AND SERVICE
6.3.

Visual Check for Damage / Level of the Compressed Air Cylinder

(1) Check the apparatus for any possible damage. If there is any visible damage
return for service, DO NOT USE!
(2) Check the level of compressed air cylinder using the air pressure indicator.
The cylinder should be refilled if less than 190 bar is displayed
( Section 4).
(3) Clean the unit if necessary and return it to the storage location.
6.4.

Regular Checking

Checking should be performed regularly in accordance with the intervals shown in
Section 6.1 and as follows:
(1) Check the air pressure indicator.
Cylinder must be completely full
(2) General condition check.
The unit, including bag must be clean and undamaged.
(3) Check the seal.
The seal should be intact and undamaged.
(4) Monthly check of the access to the unit.
The access to the unit should not be altered or blocked.
Attention!
Units which fail the check or which are due for their annual check
must be returned for service.
16
S-Cap-Air
MSA
GB