Power Up Sequence - Mettler Toledo VIVA Manual De Operación

METTLER TOLEDO
2. Set the scale base on a sturdy, level surface. Level the scale by turning the adjustable feet on the bottom of
the unit. Adjust the feet until the level bubble is in the center of the circle.
Bubble indicator:
Correct
3. Put the platter on top of the VIVA scale base.
4. Connect the tower display cable to the scale.
5. Connect the power cord from the wall transformer to the scale base.

Power up sequence

Plug the adapter into a properly grounded AC power outlet to switch on the scale. The scale will go through a
series of self-tests, and then proceed to normal operating mode. The power-up sequence is as follows:
1. All segments of the display characters are lighted. This verifies operation of all segments;
2. The scale displays the country code and GEO code, software part number and revision.
3. The scale then captures zero and is ready for normal operation.
Note: Before switching on the Viva scale, always make sure there is nothing on the platter.
VIVA Operation Manual
Wrong
9