Installation; Environment; Contents Of Packaging; Setup - Mettler Toledo VIVA Manual De Operación

METTLER TOLEDO

Installation

Environment

Before you install your VIVA scale, identify the best location. The proper environment enhances the operation
and longevity of the scale. Keep in mind the following factors, which might have a negative influence on the
scale's operation:
•
Vibration diminishes the scale's ability to measure accurately. Excessive vibration from equipment
such as conveyors can cause inaccurate and non-repeatable readings.
•
Be sure the scale is leveled properly.
•
Air currents can also diminish the scale's performance. Avoid placing the scale in front of or directly
under air vents.
•
Other than items being weighed, keep the scale free from objects rubbing or pressing against the
platter.

Contents of Packaging

Package contents for all VIVA units include:
•
VIVA scale base
•
Platter
•
AC-DC Power Adapter
•
peration Manual
O
•
Display Cables (one short and one long)
•
ower included and attachment hardware (The optional display may be packed separately)
T
•
Base Bracket (weigh only version with round corner platter)

Setup

1. Open the box, carefully remove the packing material, take all items out of the carton.
2. Attach the display as described below, depending on which version of scale you ordered:
For Price Computing Version:
Tower
Pin attachment holes
Attachment Screws (2)
Connector of cable
Attachment pins (2)
Tower Mounting Bracket
Table surface
Attachment wing nuts (2)
for Attachment Screws
VIVA Operation Manual
A: Pull the connector of the cable through the holes of
the table surface and tower mounting bracket;
B: Put (2) screws though the (2) arch holes on the
bracket and (2) holes on the table surface;
C: Attach cover to the surface of table with (2) nuts.
D: Connect the cable to the connector at the bottom of
the tower display
E: Attach the base of the display to the mounting bracket
by insuring that the (2) pins on the bracket are
inserted in the holes of the base to attach the tower
and snap the tower into place.
7