Display - Endress+Hauser RIA250 Manual De Instrucciones

Process display

5.2 Display

Parameter
Decimal point
Number of decimal points
in the display
Display value 0%
Display value at 0%
sensor value
Display value 100%
Display value at 100%
sensor value
Offset
Signal offset to match
measured value display
Scale bargraph/
analogue output 0%
Allocation of the numeric
display value to the
bargraph 0% value.
When operating with the analogue output option this value is taken as the output
range start.
Scale bargraph/
analogue output 100%
Allocation of the numeric
display value to the
bargraph 100% value.
When operating with the analogue output option this value is taken as the output
range end.
For the inverted signal output the 100% value is to be set smaller as the 0% value!
56
Setting up selections
DI DP
Selection range:
0 to 4 decimal points
DI LO
Value:
-19999 to 99999
DI HI
Value:
-19999 to 99999
OFFST
Value:
-19999 to 99999
BG LO
Selection range:
DI LO
Display value 0% (
Display value 100% (
BG HI
Selection range:
DI LO
Display value 0% (
Display value 100% (
Default
settings
9999,9
0,0
100,0
0,0
0,0
) to
DI HI
)
100,0
) to
DI HI
)
DISPL
Actual