Technical Data - baltur COMIST 72 DSPGM Manual De Mantenimiento, Uso E Instalación

TECHNICAL DATA

E
N
G
THERMIC CAPACITY
L
I
FLOW RATE
S
MINIMUM PRESSURE (*)
H
NATURAL GAS TRANSFORMER
THERMIC CAPACITY
FLOW RATE
FUEL VISCOSITY
LIGHT OIL TRANSFORMER
VOLTAGE
FAN MOTOR
PUMP MOTOR
STANDARD ACCESSORIES
BURNER FIXING FLANGE
INSULATING GASKET
FILTER
FLEXIBLE PIPE
NIPPLE
STUD BOLTS
EXAGONAL NUTS
FLAT WASHERS
TECHNICALAND FUNCTIONALCHARACTERISTICS
• Alternate natural gas/light oil burner.
• Two-stage progressive output operation.
• Ability to operate with output modulation by means of automatic
RWF40 regulator mounted on the control panel (to be ordered
separately with the modulation kit).
• Ability to operate with any type of combustion chamber.
• Air-gas mixing at blast-pipe and high pressure mechanical atomi-
sation of fuel using nozzle.
• Ability to obtain optimal combustion values by regulating combu-
stion air and blast-pipe.
COMIST
72 DSPGM 122 DSPGM
916
MAX kW
348
MIN kW
92
MAX m³/h
35
MIN m³/h
24
CE mbar
916
MAX kW
348
MIN kW
77
MAX kg/h
29
MIN kg/h
10 kV - 20
mA
Volt
1,1 - 2950 2,2 - 2950
kW / r.p.m
0,55 - 1420
kW / r.p.m.
1
1"
N°2 - 1"x1"
N°1 - 1"x1"
N°4 M12
N°4 M12
N°4 Ø12
• Maintenance facilitated by the fact that the mixing unit and the
atomisation unit can be removed without having to remove the
burner from the boiler.
• Minimum and maximum air flow regulation for first and second
stage by means of electric servomotor with pause closure of gate
to prevent any heat dispersion to flue.
• A valve tightness control can be fitted on the burner.
• Prepared for automatic fuel switching.
4 / 30
0006080115_200909
COMIST COMIST COMIST
180 DSPGM 250 DSPGM
1364 1981
652 688
137 199
66 69
23 39
8 kV - 20 mA
1364 1981
652 688
115 167
55 58
1,5°E a/at 20°C
12 kV - 30 mA
3N - 230/400V - 50Hz
3 - 2870
0,75 - 2800
1
1"1/4
N°2 - 1"¼x1"¼
- -
N°6 M20
N°6 M20
N°6 Ø20
COMIST
300 DSPGM
3380 3878
1127 1304
340 390
113 131
105 140
3380 3878
1127 1304
285 327
95 110
14 kV - 30 mA
7,5 - 2870
1,5 - 2800
2
- -
N°4 M16
N°4 M16
N°4 Ø16