Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3 Delivery and storage
Scope of delivery
• High-efficiency circulation pump with 2 gaskets
• Thermal insulation shell (5)
• Salmson connector (9)
• Installation and operating instructions.
Transport
inspection
Inspect for transportation damage and check completeness immediately after
delivery, and claim immediately if necessary.
Transport and storage conditions
Protect from moisture, frost and mechanical loads. Permissible temperature range:
-10 °C to +50 °C.
4 Installation
4.1 Installation
May only be installed by qualified technicians.
Préparation
• Choose an installation point that is as easily accessible as possible.
CAUTION! Damage to the pump!
An incorrect installation position may damage the pump.
• Select the installation point in line with the allowable installation position
(Fig. 2).
• The motor must always be installed horizontally.
• The electrical connection must never face upwards.
• Observe the pump's allowable installation position (Fig. 2), rotate the motor
head (3+6) if necessary.
CAUTION! Damage to the pump!
The wrong materials can cause corrosion damage.
• When connecting to galvanised piping, use only red brass screwed connections.
• Install shut-off devices upstream and downstream of the pump to facilitate
pump replacement.
CAUTION! Damage to the pump!
Leaking water may damage the control module.
• Align the upper shut-off device such that leaking water cannot drip onto the
control module (6).
Salmson
English
27
Publicidad
Tabla de contenido
