Setting A Station "Anywhere - Hilti POS 150 Manual De Instrucciones

5. Set station
en

7.1.3 Setting a station "anywhere"

1. Select station type
2. Give the station a name
48
Return to previous dialog
@
Set the height of the station (see no. 6)
;
Display results
=
Set station
%
If there are more than two orientation points
& the standard deviations "StDev(HA)" and
"StdDev(H)" are displayed.
Return to previous dialog
@
When heights are used, a new height can be
; set (even after setting the station has been
completed)
Confirm dialog
=
Switch use of heights on / off
%
Selecting the coordinates of the point system
&
Select station setting type: Setting a station
( "anywhere"
Return to previous dialog
@
Start the dialog to measure the reference points
;
Start the calculation (possible only after at least
= 2 reference points have been measured)
Give the station a name
%
Setting the height of the device
&