Measure And Record; The Principle Of "Measure And Record - Hilti POS 150 Manual De Instrucciones

8.2.1.1 Procedure for application "As-built with prism"
1. Start dialog "As-built"
en
2. Entry dialog "As-built"

8.3 Measure and record

8.3.1 The principle of "Measure and record"

"Measure and record" can be used to measure points with an unknown position.
54
Select "As-built" application
@
Cancel and return to previous screen
@
Confirm dialog
;
Entry and selection field for as-built point
=
Return to previous dialog
@
Entry and display of the attributes assigned to
; the point
Confirm dialog and save data
=