Bubble Level (Compensator); Functions Required For Various Applications; Setting A Station And Orientation; Overview - Hilti POS 150 Manual De Instrucciones

6.2 Bubble level (compensator)

en

7 Functions required for various applications

7.1 Setting a station and orientation

7.1.1 Overview

Setting of the station and orientation is required in order to position the tool in the corresponding coordinate
environment. Setting the station positions the tool within the coordinate system, and orientation aligns the horizontal
circle of angles.
The process for setting the station offers various options:

7.1.2 Setting the station over a point

1. Select station type
46
Return to previous dialog
@
Confirm current dialog
;
Title bar: Level tool
=
Increase laser plummet intensity
(settings 1 – 4)
Reduce laser plummet intensity
(settings 1 - 4)
Return to previous dialog
@
When heights are used, a new height can be
; set (even after setting the station has been
completed)
Confirm dialog
=
Switch use of heights on / off
%
Selecting the point system
&