Procedure For Application "Measure And Record; Area Measurement; The Principle Of Area Measurement - Hilti POS 150 Manual De Instrucciones

8.3.2 Procedure for application "Measure and record"

1. Start dialog "Measure & record"
2. Measurement dialog "Measuring point"

8.4 Area measurement

8.4.1 The principle of area measurement

The tool can calculate the horizontal or vertical area enclosed by a total of up to 99 consecutively measured points.
The points can be measured in a clockwise or counterclockwise sequence.
Selecting the application "Measure and record"
@
Cancel and return to previous screen
@
Entry and display of the attributes for the cor-
; responding measuring point. Entry of up to five
different attributes per measuring point
Measure individual distance
=
Measure distances and angles at the touch of a
% button and save data at the same time
Following valid distance measurement, angles
& are measured and the distance is then saved
together with the angle.
Entry of the alphanumerical point designation
(
Entry of the reflector height (if the station has
) been set up with heights)
en
55