Data Exchange; Introduction; Calibration And Adjustment; Hilti Calibration Service - Hilti POS 150 Manual De Instrucciones

9.1.2.1 Point manager
9.1.2.2 Graphic manager
The graphic manager displays all points and graphic elements. The display can be moved and made larger. The
graphic elements, such as lines and curves, are used in the reference line application.

10 Data exchange

10.1 Introduction

The USB data storage device can be used to exchange files in the formats *.csv and *.txt directly from the controller,
both for data import and data export.

11 Calibration and adjustment

11.1 Hilti Calibration Service

We recommend that the tool is checked by the Hilti Calibration Service at regular intervals in order to verify its reliability
in accordance with standards and legal requirements.
Use can be made of the Hilti Calibration Service at any time, but checking at least once a year is recommended.
The Calibration Service provides confirmation that the tool is in conformance, on the day it is tested, with the
specifications given in the operating instructions.
The tool will be readjusted if deviations from the manufacturer's specification are found.
After checking and adjustment, a calibration sticker applied to the tool and a calibration certificate provide written
verification that the tool operates in accordance with the manufacturer's specification.
Calibration certificates are always required by companies certified according to ISO 900x. Your local Hilti Center or
representative will be pleased to provide further information.
Return to data manager start dialog
@
Fixed points setting
;
Measuring points setting
=
Display all points setting
%
Return to data manager start dialog
@
Delete the marked graphic element
;
Define new graphic element
=
en
67