Station With Building Control Line - Hilti POS 150 Manual De Instrucciones

7.1.4 Station with building control line

1. Select station type
en
2. Select control line point 1
3. Select control line point 2
50
Return to previous dialog
@
When heights are used, a new height can be
; set (even after setting the station has been
completed)
Confirm dialog
=
Switch use of heights on / off
%
Selecting the point system
&
Return to previous dialog
@
Take the measurement to the reference point
;
Return to previous dialog
@
Take the measurement to the reference point
;
Confirm dialog
=