Hilti POS 150 Manual De Instrucciones página 37

ORIGINAL OPERATING INSTRUCTIONS
POS 150/180 total station
It is essential that the operating instructions
en
are read before the tool is operated for the
first time.
Always keep these operating instructions to-
gether with the tool.
Ensure that the operating instructions are
with the tool when it is given to other persons.
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation "the tool"
always refers to the POS 150 or POS 180.
Total station front 1
Carrying handle
@
Focusing knob
;
Vertical drive
=
Horizontal drive
%
Contents
1 General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
1.1 Safety notices and their meaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
1.2 Explanation of the pictograms and other information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
2 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
2.1 Use of the product as directed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
2.2 Description of the tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
4 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4.1 Basic information concerning safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4.2 Misuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4.3 Proper organization of the work area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4.4 Electromagnetic compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4.4.1 Laser classification for tools of the Class 3R / Class IIIa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4.5 General safety rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
4.5.1 Careful use of battery-powered tools or appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
4.6 Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
5 First steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
5.1 Displays and controls on the controller touch screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
36
Tribrach lock
&
Sight
(
Telescope with laser distancer
)
Objective lens
+
Guide light
§
Operator keyboard
/
Display
:
Total station rear side 2
Radio antenna
·
Battery compartment lock
$
Battery compartment
£
Circular bubble level
|
Eyepiece
¡
Tribrach screw
Q
Laser plummet
W
Controller 3
Display
@
Control panel
;
Charging socket
=
USB socket (master)
%
USB socket (slave)
&