Tabla de contenido
Publicidad
SECTION 2. PREPAREYOUR MACHINEFOR SEWING
Plug in the machine and switch on the power
NOTE:
Before inserting the plug into your machine, be
sure the power switch is OFF.
Insert the machine
plug into the three-prong
plug
connector,
as shown.
It will only fit one way.
,tl, Insert the power supply
plug into the wall outlet.
Power supply plug
/_ Power supply
(_ Plug connector
(4_ Power switch
Machine plug
4, Push the power switch to turn on the power and
sewing light.
SAFETY FEATURE:
Your machine will not operate unless the power switch is
turned on. If you are interrupted or stop sewing, turn off
the power switch to prevent injury to children.
_6_Power switch
®-
Foot control use
The foot control regulates the speed at which you sew.
To increase speed, gently press down with the ball of your
foot.
To decrease speed, release your foot pressure slightly,
NOTE:
The foot control is sensitive and will increase or
decrease your sewing speed immediately.
Practice on a scrap of fabric to regulate your
sewing speed to your taste and needs.
"7_Foot control
f
OPERATING
INSTRUCTIONS:
"For appliances with a polarized plug (one blade wider than the other ).
To reduce the risk of electric shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install the proper
outlet. Do not modify the plug in any way."
"Foot Controller Model YC-482P for use with Sewing Machine
Model 385. 16644xxx
xxx-represents numbers 000 through 999
14
Publicidad
Tabla de contenido
