4, Hook the thread on the corner (_, and then pass the
thread through the thread guide plate and the looper
thread guide.
,_4_ Thread guide plate
6) Looper thread guide
Pass the thread through the looper thread take-up
lever (upper).
Looper thread take-up lever (upper)
%
Pass the thread through upper looper thread guide.
Holding the end of the thread with a pair of tweezers,
pass it through the hole on the upper looper. Pull 10
cm (4") or more of thread through the hole to the back
of the machine.
Upper looper thread guide
(_ Upper looper
How to thread only the upper looper
Turn the hand wheel toward you until the upper looper
comes to the middle point of its travel, and unhook the
thread of the lower looper from the upper looper.
Thread the upper looper.
_ Lower looper thread
(_ Upper looper
30