Kenmore 385.16644 El Manual Del Propietario página 23

• Threading the lower looper
Open the looper and side covers.
Place the spool of thread on the right side spool pin.
Points to thread for lower lopper are marked in green.
A convenient threading chart is placed on the machine
body which is located inside the looper cover.
• Draw the thread through the right side thread guide
from back to front.
_ Thread guide
Pass the thread through the holes on the right side of
the thread guide plate as illustrated.
Thread guide plate
Hold the thread at both ends and tug gently to ensure
the thread is correctly inserted between the tension
discs.(If the presser foot lifter is raised, the thread
easily inserts between the tension discs.)
t3j Thread tension dial
22