Kenmore 385.16644 El Manual Del Propietario página 37

• Changing to two-thread serging
In case of two-thread serging, use only the left-hand
needle and the lower looper thread. Remove other
threads.
• To attach the spreader
Put the tip of the spreader into the hole on the upper
looper, and slide the spreader down into the holder.
__) Spreader
_-_)Upper looper
Holder
To remove the spreader
Pull tab A on the holder toward you lightly. Push the
bottom of the spreader up and pull it out.
A
_' For standard two-thread serging, set the machine as
illustrated above.
_4_ Lower looper pre-tension setting slider (STD. position)
(..5)Changeable thread guide (lower position)
• Standard two-thread serging is as illustrated.
Wrong side of fabric
_7_Needle thread
_) Right side of fabric
_.9)Lower looper thread
®
36