Position Signalization; Exploded View; Function - Georg Fischer EA11 Manual Instrucciones

Position signalization

8 Position signalization
Designation
Position signalization

8.1 Exploded view

Fig. 10
1 Position indicator
2 System cable
3
Circular magnet
4 Position sensor

8.2 Function

The position signalization enables the exact capturing of the mechanical position of
the output shaft. Output signal is a current of 4 – 20 mA. (4 mA: CLOSED, 20 mA:
OPEN). The position signalization can be combined with the controller print or the
monitoring print. The position signalization board is mounted on the limit switches S1,
S2 and is connected electrically to the controller print or the monitoring print via a
system cable.
64
Technical data
1
2
3
8
5
6
7
8
Accessories for electrical actuators
Code
199 190 084
4 7
Button
LED
Jumper
Board
5
6