General Information; Appliance Specifications; General Prescriptions; Reminders For The Installer - ALI NPD98G Serie Instructions For Installation, Operation And Maintenance

GENERAL INFORMATION

This chapter contains general information which all users of the
manual must be familiar with. Specific information for individual
users of the manual is provided in subsequent chapters (" IN-
STRUCTIONS FOR .... " ).

1 APPLIANCE SPECIFICATIONS

• The appliance data plate is located inside the control panel.
• The appliance model and serial number are detailed on de-
cals and on the packaging.

2 GENERAL PRESCRIPTIONS

The manufacturer will not be liable for
any damage or injury resulting from fai-
lure to observe the following rules.

REMINDERS FOR THE INSTALLER

• Read this manual carefully. It provides important information
for safe installation, use and maintenance of the appliance.
• Installation, conversion to a different type of gas and applian-
ce maintenance must be carried out by qualified technicians
authorized by the manufacturer, in compliance with current
safety standards and the instructions given in this manual.
• Identify the specific appliance model. The model number is
detailed on the packaging and on the appliance data plate.
• The appliance must be installed in a well-ventilated room.
• Do not obstruct any air vents or drains present on the ap-
pliance.
• Do not tamper with appliance components.

REMINDERS FOR THE USER

• Read this manual carefully. It provides im-
portant information for safe installation,
use and maintenance of the appliance.
• Keep this manual in a safe place known to
all users so that it can be consulted throu-
ghout the working life of the appliance.
• Installation, conversion to a different type
of gas and appliance maintenance must
be carried out by qualified technicians au-
thorized by the manufacturer, in complian-
ce with current safety standards and the
instructions given in this manual.
• For after-sales service, contact technical
assistance centers authorized by the ma-
nufacturer and demand the use of original
spare parts.
• Have the appliance serviced at least twice
a year. The manufacturer recommends ta-
king out a service contract.
• The appliance is designed for professional
use and must be operated by trained per-
sonnel.
2
• The appliance is to be used for cooking
food as specified in the prescriptions for
use. Any other use is considered to be im-
proper.
• Do not allow the appliance to operate emp-
ty for prolonged periods. Only pre-heat the
oven just before use.
• Do not leave the appliance unattended
while in operation.
• In the event of an appliance fault or mal-
function, shut the gas shut-off valve and/or
switch the appliance off at the main switch
installed upline.
• Clean the appliance following the instruc-
tions given in Chapter " INSTRUCTIONS
FOR CLEANING".
• Do not store flammable materials in close
proximity to the appliance. FIRE HAZARD.
• Do not obstruct any air vents or drains pre-
sent on the appliance.
• Do not tamper with appliance components.
• The appliance may be used by children no
younger than 8 years of age and by per-
sons with reduced physical, sensory or
mental capabilities, or lack of experience
and knowledge, as long as they are super-
vised or have been instructed concerning
safe use of the appliance, understanding
the hazards involved. Children must not
be allowed to play with the appliance.
• Cleaning and maintenance to be carried
out by the user must not be performed by
unsupervised children.
N.B.: To ensure correct hygiene and redu-
ce the wear and breakage of the tap, remo-
ve, clean and lubricate periodically (once a
week) using food-grade grease. (For details
refer to the sheet included in the package).

REMINDERS FOR THE MAINTENANCE TECHNICIAN

• Read this manual carefully. It provides important information
for safe installation, use and maintenance of the appliance.
• Installation, conversion to a different type of gas and applian-
ce maintenance must be carried out by qualified technicians
authorized by the manufacturer, in compliance with current
safety standards and the instructions given in this manual.
• Identify the specific appliance model. The model number is
detailed on the packaging and on the appliance data plate.
• The appliance must be installed in a well-ventilated room.
• Do not obstruct any air vents or drains present on the ap-
pliance.