Cleaning The Interior; Main Components; Direct Heat Gas Boiling Pan; Indirect Heat Gas Boiling Pan - ALI NPD98G Serie Instructions For Installation, Operation And Maintenance

• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the pressure switch
• Remove the front panel
• Remove the control panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the thermostat
• Remove the front panel
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the level resistor and the heating element
• Empty the jacket.
• Remove the front panel
• Remove the thermostat bulb from its seat.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.

22 CLEANING THE INTERIOR

• Check the condition of the inside of the appliance.
• Remove any built-up dirt.
• Check and clean the fumes exhaust system.

23 MAIN COMPONENTS

23.1

DIRECT HEAT GAS BOILING PAN

• Gas valve
• Main burner
• Pilot burner
• Thermocouple
• Igniter
• Solenoid fill valve
• Energy regulator
• Indicator light.
• Control knob
• Safety thermostat
23.2

INDIRECT HEAT GAS BOILING PAN

• Gas valve
• Main burner
• Pilot burner
• Thermocouple
• Igniter
• Solenoid fill valve
• Energy regulator
• Indicator light.
• Control knob
• Pressure switch
• Water level resistor
23.3

DIRECT HEAT ELECTRIC BOILING PAN

• Solenoid fill valve
• Energy regulator
• Indicator light.
• Control knob
• Safety thermostat
• Heating element
23.4

INDIRECT HEAT ELECTRIC BOILING PAN

• Solenoid fill valve
• Energy regulator
12
• Indicator light.
• Control knob
• Heating element
• Pressure switch
• Water level resistor