Adc Controller - SDMO RES 9.5EC Manual De Instalación, Uso Y Mantenimiento

2.2.3 ADC controller

The generating set is fitted with a Kohler
following special features:
Compact design
Fully integrated into the generating set
LED display showing:

Hours of operation

Starting cycle status

AC voltage (ADC-RES)

Frequency (Hz) (ADC-RES)

Battery voltage (ADC-RES)

Set-up information (ADC-RES)

Application software version (ADC-RES)
LED display for fault notification:

High battery voltage

High engine temperature

Low battery voltage

Low oil pressure

Number of starting cycles exceeded

Overspeed

Over frequency

Overvoltage

Under frequency

Under voltage
Soft touch keypad for configuration and settings

Menu access password protected

Voltage, gain and engine speed settings

System configuration (nominal voltage/frequency and generating set model)
Main switch mounted on the junction box: Run (On), Off/Reset and Auto.
Remote on/off option (2 wires)
High level of protection for electronics against corrosion and vibrations

Coated electronics

Sealed connections
Isochronous digital regulator ensures a very even speed for all load levels
Digital voltage regulation: ± 1.5% efficiency between no load and full load
Auto start for programmed starting cycles
Upgradeable application software (ADC-RES)
®
ADC 2100 or ADC-RES (Advanced Digital Control) controller. This controller has the
7/73