Pratissoli LK Serie Manual De Reparación página 40

Remove the shim from under the shank of the central
connecting rod.
Unscrew the con-rod screws (pos. , Fig. 17).
Remove the con-rod caps with the semi-bearings, taking
special care of the disassembly sequence during disassembly.
The con-rod caps and their relative half
supports must be reassembled in exactly the
same order and coupling with which they were
disassembled.
To avoid possible errors, caps and half supports have been
numbered on one side (pos. , Fig. 18).
Fig. 16
Advance the three half supports as far as possible in the
Fig. 17
direction of the head.
Remove the three upper half-bearings of the half supports
(pos. , Fig. 19).
40
Fig. 18
Fig. 19