Assembly Of Mechanical Parts - Pratissoli LK Serie Manual De Reparación

Remove the two spindle locking Seeger rings using a special
tool (pos. , Fig. 43).
Remove the spindle (pos. , Fig. 44) and extract the con-rod
(pos. , Fig. 45).
To separate the rod from the piston guide, unscrew the
hexagonal head M6 screws with a special wrench (pos. ,
Fig. 46).
Fig. 43
Complete the disassembly of the mechanical part by
removing the oil level indicators and the eyebolts.
2.1.2

Assembly of mechanical parts

Proceed with assembly following the reverse order indicated
in par. 2.1.1.
The correct sequence is as follows:
Attach the two oil level indicators, the two oil drain plugs and
the 90° quick coupler (pos. ,  and  Fig. 47).
Fig. 44
Assemble the red to the piston guide.
Insert the piston guide rod into its seat on the piston guide
(pos. , Fig. 48) and join the rod to the piston guide by means
of the 4 M6x20 screws (pos. , Fig. 49).
Fig. 45
45
Fig. 46
Fig. 47
Fig. 48